Sub total
Discount
(You'll pick your shipping method in the next step)
PROCEED TO SECURE CHECKOUT
| AVAILABLE SIZES | Folding 250 |
| AVAILABLE COLOURS | Grey |
| YEAR | 2024 |
| GENDER | Unisex |
| MPN | 2235750 |
Enter your details below and we’ll email you once this item is back in stock.
For Wakeboard Boats - Bigger boats call for more water displacement to make a bigger, longer wake
The LF Wakesurf Edge Mega Folding Wake Shaper 250 will make big wakes BIGGER! The Mega Folding 250 requires a mounting surface 5" tall by 12" long - clear of hull steps greater than 3/8".
Adjustable design lets you decide! Shift the Wakesurf Edge location on the fly to create deeper pockets or a longer wake face with more push.
With an 85% bigger face than the Wakesurf Edge Pro, the Liquid Force Mega Wakesurf Edge Wake System creates the biggest wake for larger boats. The patented concave water channelling surface displaces water and increases the length of the wake and keeps it incredibly clean.
The MEGA Wakesurf Edge is made from super durable non-corrosive material and has strong suction cup attachments that won't damage gel-coat or leave markings on your boat. IT FLOATS! No need to worry about your investment sinking to the bottom.
To make the most of the MEGA Wakesurf Edge, your boat should be 22' or longer, have a 325hp engine or greater, and a ballast system.
It will work on most inboard boats, though you should measure your boat to make sure. The suction cups need 4.5" of smooth, flat surface to attach to. If there is a lip/step above the attachment area on your hull that protrudes more than 3/8", then you will need 6.5" of smooth flat surface instead of 4.5". The suction cups can handle 1/4" of curvature over a 5" distance. If the attachment area on your hull has more curvature than that (as with some 2005-2008 Malibu 23LSV hulls), then you will need to purchase our Curvature Adapter Rings and install them onto your Wakesurf Edge Shaper.
Liquid Force Mega Wakesurf Edge Wake System Design Details
Teach your old boat some new tricks! The Wakesurf edge helps you get the best surf performance from your boat.
Adjustable design lets you decide! Shift the Wakesurf Edge location on the fly to create deeper pockets or a longer wake face with more push. New boat or old, the wake surf edge will increase your wake and boost your wake surfing fun!
HUGE Water Displacement Wing for Maximum Wave Height! The LARGEST Wake Shaper Face (14" x 18" = 252sq")
Patented Concave Water Channelling Wing
Super Strong Suction Cup Attachment!
Made with Rust-free Materials and FLOATS!
Do NOT tether shaper to Boat.
For Boats 21' or Longer, Have a 325hp Engine or Greater, and Sumo Ballast System
Level Load Boat for Nose Down for the Driver's Visibility and a Long Wake
HUGE Water Displacement Wing for Maximum Wave Height! The LARGEST Wake Shaper Face (14" x 18" = 252sq")
HOW YOUR WAKESURF EDGE WORKs & HOW A WAKE IS FORMED?
A question we overlook sometimes, but is important to understand when shaping your own custom wakesurf wave. A wake is formed when the water surrounding the mass of your boat converges as the boat moves through the water. The faster the speed, the faster the water converges to fill the void that the weight of your boat makes in the water. The heavier your boat is (ballast) the deeper the boat sinks and creates a deeper hole in the water and thus creates a larger void for the water to fill after the boat moves. Tah Dah! A better wake!
HOW TO FINE TUNE YOUR WAKE
Don’t settle for just ANY wake. You have the power to form and shape your wake for the most amount of fun possible behind your boat. You just need to know how to distribute your weight (ballast) appropriately on the boat. If you have too much weight just in the back, your wake will be tall and short. (Refer to the above information on why that is.) If you have too much weight (ballast) in the bow of your boat your wake will be longer but very small with no shape. The key is to balance the weight in the bow and in the back to make that perfect space for the water to converge and form a great wake.
HOW THE WAKESURF EDGE CREATES YOUR WAVE
As your boat sits deep in the water and moves, the water flows down the sides of your boat at an equal rate. By placing the Wakesurf Edge it channels the water flow on one side, causing the boat to yaw slightly and re-shaping that void in the water that the boat creates. Once the boat moves through the space at that angle, the water then converges at a different rate and shapes one side of the wake cleaner than the other. It’s all about how that water converges and the rate at which it colides and forms the wave
WHERE TO ATTACH YOUR WAKESURF EDGE
PLACEMENT OF YOUR WAKESURF EDGE
Use the diagram for a good starting point to attach your Wakesurf Edge. It’s important to note that when your boat is still in the water it sits at a different angle than when your boat is pulling at wake surf speed. Attach your Wakesurf Edge at a slight upward angle to reflect the angle that your boat will travel in during the ride. That will ensure that the face of the Wakesurf Edge is causing optimal water flow obstruction and forming the best possible wave shape. A good rule of thumb on how deep to attach the Wakesurf Edge is to attach it so that 2 or 3 inches of the Wakesurf Edge is sticking out of the water. Remember that the back of the boat sinks down upon acceleratation.
FORWARD ON THE BOAT
BACKWARD ON THE BOAT
Your business is extremely important to us and if you're not happy then we're not happy. We are therefore fanatical about making sure that everything arrives with you in perfect condition and in good time.
Here is a summary of how we do things.
1) We aim to process and ship all orders on a daily basis if placed before 3pm Monday to Friday, Sadly we are not able to ship orders at weekends or Bank Holidays (we like to get out on the water sometimes too). If you place your order after 3pm then we will still endeavour to process and ship it on the same day but this may not always be possible until the following working day.
2) For goods stored in one of our satellite warehouses, transhipment may sometimes cause a slight delay. This is rare though and we'll always notify you straight away if this will potentially affect all or part of your order.
3) For goods on re-order from our suppliers but not physically back in stock yet the words "Coming Soon" or similar will be displayed. These goods are available for pre-order only over the phone by calling +44 (0)1597 850114. If you pre-order something we will let you know the arrival date that we have been quoted by our suppliers, but we're afraid that these dates do sometimes change but we'll always try and keep you fully in the loop. By pre-ordering goods you are basically securing them for when they arrive with us. Pre-orders are processed and shipped on a "first come first served" basis i.e. processed in strict chronological order (the first to pre-order will be the first to receive their goods).
4) Acceptance of Parcels
5) For very urgent orders please contact us on +44 (0)1597 850114 and we can potentially upgrade your delivery option to suit your requirements.
Shipping options - Depending on the value and weight of your shopping basket at checkout, the various shipping rate choices that would apply to your delivery address will be displayed on the checkout page once you've entered your delivery postcode. You will then be able to select your preferred choice.
European and Non-European country rates will be displayed when the "deliver to" country destination is entered.
United Kingdom postcode options include:-
Please note that VAT is not charged on consignments to the Channel Islands
